Back to E-form Control Page

E-Form Change Control

Form Name : SE 06/00

Revision History

Revision Number	Date	Change
2.0	28/10/1998	Initial Release
2.1	09/06/1998	New Logo. Check length of CRNs, SARNs
2.2	4/9/1998
2.3	21/04/1999	Main Warning bells/cross if Test Facility bell/cross Night results only required for Rear (2b) lamps Layout changes for filler 2.6 Licensee’s Reference cells added. Ctrl-? For cell help added Issue number incremented
2.4	10/08/1999	Image changed from FORS to DoTRS, issue and revision numbers incremented, issue date updated.
2.5	25/04/2000	Legend for ECE approvals changd to "..no further responses required", changes made for requirements of ECE 6/01 including: additional categories and their luminous intensity requirements, provision for single lamp, singe lamp marked D, two lamp assembly, indication of testing to either ADR 6/00,ECE 6/00 or ECE 6/01 added, when testing to ECE 6/00 cat 3 & 4 included,warning added if Lamp category not selected in test results, lamp category selection added for ECE approval
2.6	23/01/2003	Update Departmental Logo.
2.7	8/12/2003	Upper limit on reference axis for cat 2a changed from 200 to 350.Attachment detect added. Issue Num method updated. Trigger added
2.8	4/11/2004	Logo changed. Cells requiring X &Y co-ordinates added to check for colour of light emitted. Deleted DataPresent cell. ECE checks enhanced. Additional categories allowed in Det 2 of 2000 allowed when tested to ADR 6/00. SingleLamp etc responses allowed for with ADR 6/00 testing with consequential changes to intensity limits in that case. Test results on axis for Cat 5 no longer required if ADR or ECE6/00 tested. ADR and ECE 6/01 intensity limits aligned where not already so.
2.9	05/10/2006	Added radio button to allow for a Single Lamp with multiple light sources. Updated maximum intensities allowed for lamps with multiple light sources. Added two new cells to allow for testing of Lamps with multiple light sources with one or more light source failure. Both of these are to align to Appendix A Clause 6.1 Note 3.
2.10	13/10/2006	Corrected error in preventing save if no TFId when ECE Approval used. Changed pop up lists from chlist.txt to built in list. Added Rear 2a category into multiple light source test with one light source failed group. Blocked use of multiple light source provisions if tested to ECE 6/00. For revision 9 or greater added back in block if tested to ECE 6/00 and any of single/multiple lamps selected.
2.11	11/01/2008	Added requirement for entering data for reference axis luminosity when testing under ADR 6/00 for category 5 lamps.
2.12	11/04/2008	General update of form. Remove ability to apply for CRN with ECE Approval.
2.13	30/01/2009	Increase TFId field size and make entry of 6 characters mandatory.
2.14	30/04/2009	Rectify the incorrect warning message in X and Y CIE trichromate co-ordinates fields.
2.15	14/09/2010	Add warning bells if CRNs are not provided for Form Use option 2; update chromaticity co-ordinates for Test Results.
2.16	27/07/2012	Update Departmental Logo.